Display:ListGrid

Filters

Sub-Categories

FIL-229

316 SS jacketed Nutsche filter, sieve, separator. (see pictures) Has SS Filter Element screen with 0.25" diameter holes between 1" top inlet and 1" bottom outlet. Rated 75 PSI @ 350 degF on both shell and jacket.

Type

NUTSCHE

Material

316 Stainless Steel (316SS)

Manufacturer

TOLAN

FIL-173

31" ID Ceramic Nutsche type filter.

Type

NUTSCHE

Material

CERAMIC

Manufacturer

FIL-176

26 " ID. Ceramic Nutsche type filter.

Type

NUTSCHE

Material

CERAMIC

Manufacturer

FIL-255

Used Rosenmund 6 Square Meter Nutsche Filter Dryer, Agitated. 316L Stainless Steel. Internal rated 90 PSI @ 300 Deg.F. Jacket rated 200 PSI @ 300 Deg.F. NB # 17746. Unit includes Nederman Dust Collection system. 6m2 filter area and 6m3 capacity. 110" Dia. x 181" ht.

Type

NUTSCHE

Material

316L STAINLESSS STEEL

Manufacturer

ROSENMUND,Gaston County Fab

FIL-303

Used .125 sq meter Powder Systems Limited Nutsche Filter, Hastelloy C22 product contact surfaces, 304L stainless steel no contact surfaces, 50 liter liquid capacity, 12 liter cake capacity, rated 58.8 psi at 302 f internal, jacketed for 95.7 psi at 302 f, side discharge with manually operated plug valve, air operated agitator drive, removable lower plate, vessel certified by Gilwood Fabricators, serial# 16401, national board# 008, PSL project# C-7299, built 1998.

Type

NUTSCHE

Material

Hastelloy C22

Manufacturer

POWDER SYSTEMS LTD

FIL-293

used 3V Cogeim Type Filtrodry FPP010 SD/FM Nutsche Pressure Filter Dryer. Hastelloy C22 contact parts. Design code: ASME VIII Div 1, 97/23 CE. Approx. 350 mm dia. filter plate with 0.10 Sq.M. Filtration area. 130 liter total capacity and 60 liter slurry capacity. Welded dished top and clamped flat bottom plate with hinged Davit Arm for swing away removal. Internal rated full vacuum/7 Bar design pressure @ -35/+180 deg. C. External stainless steel jacket 15 liter capacity rated full vacuum/7 Bar design pressure at -35/+180 deg. C. With top mounted dust filter. 2 blade agitator with bellows and top mounted gearbox. With hydraulic power pack for agitator, raise & lower with 200 mm stroke and side discharge operation driven by 5.5 kw 380-415 volt, 3/50, 1455 RPM motor. Comes with Extract Technology Isolation Booth with discharge valve. Drawing and manuals are available.

Type

NUTSCHE

Material

Hastelloy C22

Manufacturer

3V COGEIM

FIL-302

***SOLD*** Used- Guedu Pilot Filter Dryer, Approximately 0.21 Square Meter (100 Liter), 316 Stainless Steel, Vertical. Chamber approximate 24" diameter x 16". Internal rated 45 psi/Full Vacuum at -20 to 320 degrees F. 1/2 Pipe coil jacket rated 90 psi at -20 to 320 degrees F., jacketed bottom filter plate rated 90 psi at -20. Top entering telescoping retreat curve agitator, driven by 3 hp, 3/60/230/460 volt, 1735 rpm motor with gearbox, 59.47 to 1 ratio. Openings top: 6" with sight glass, 4" with sight glass, (2) 6", (1) 1-1/2", (1) 1". 1" Bottom outlet. Spray bar assembly. Includes hydraulic power pack. Mounted on a base. Serial# 8042, National Board# 24, Built 1991.

Type

NUTSCHE

Material

316 STAINLESS STEEL

Manufacturer

GUEDU

FIL-297

Used Rosenmund model 0.2 SQ.M jacketed Nutsche filter dryer. 316L stainless steel. 0.2 square meter filtration surface area. Rated 90 psig/full vacuum @ 350 Deg.F. 7.5 HP agitator, hydraulic bottom feeder, hydraulic agitator raise/lower, Rosenmund control system, and outboard hydraulic system.

Type

NUTSCHE

Material

316L STAINLESS STEEL

Manufacturer

ROSENMUND

FIL-298

Guedu 3 SQ.M. 316L Stainless Steel Nutsche Filter Dryer. Internal: 22 PSI/FV @ 329F MAWT. Jacket: 22PSI/FV @ 329F MAWT. 10 HP Electric Motor, 460V, 3 phase, 5-120 Hz, Class 1, Div. 1 Group C&D. Paddle Agitator (05-12 RPM). Single Mechanical Seal with Nitrogen Purge. Internal Polish Grit 320 (Ra <0.4). Clean In Place (CIP). Jacketed Filter Vessel and Bottom Dish - Bottom dish is removable; Has Casters But Have Been Unbolted Swing Side Discharge with Metal to Metal Seal. Multiple Spray Balls. NB #100.Was Installed But Never Used On Product

Type

NUTSCHE

Material

316L STAINLESS STEEL

Manufacturer

GUEDU

FIL-300

Rosenmund RoLab 0.1 Sq.M. Nutsche Filter Dryer, Agitated. Material is ALLOY 22. Internal and jacket rated 90/FV @ 302 Deg.F (-10 to +150 Deg.C). S/N RFGD 0.1-07-40109. NB # 296. (64.5 Liter). Includes Howorth Glove box Isolator with Minipurge control system. Sanitary Pharmaceutical design. approx. 18" Dia. filter vessel. Unit is rated for Hazardous Locations (class 1 division 2). Unit ONLY Test Run with High Purity Water and then never used due to plant closure.

Type

NUTSCHE

Material

HASTELLOY 22

Manufacturer

ROSENMUND