Display:ListGrid

Blenders / Mixers

Sub-Categories

BM-320

used Littleford Lodige Plow Mixer model FM-130. Stainless steel construction. 2.8. cu. ft. working/4.6 cu. ft. total capacity. Jacketed body. Shaft with plow blades and (1) high speed chopper. Both motors are 5 HP. On legs

Blender/ Mixer Type

PLOUGH

Size

4.6 CU.FT

Manufacturer

LITTLEFORD

BM-331

used Littleford Model FKM-1200-D Jacketed Plough/Plow Mixer/Dryer. 43 Cu.Ft. total, 26 Cu.Ft. working capacity. Unit equipped with 34 Sq.Ft. Jacketed Dust Collector/Filter. Vessel rated Full Vacuum. Jacket rated 90 PSI @ 330 Deg.F. End plate is also jacketed. Main shaft is hollowed to accommodate heating or cooling media. 304 Stainless Steel. 75 HP, 460 volt motor. Built in 2008 and had little use.

Blender/ Mixer Type

PLOUGH

Size

43 CU.FT.

Manufacturer

LITTLEFORD DAY INC.

BM-223

65 Cu.Ft. (1840 Liter) working capacity, Jacketed Plow / Plough Mixer Model AG 78 built by Walter Equipment Ltd. (Similar to Littleford FKM-3000). Jacket rated to 15 PSI. Mixing chamber is 115.5" L x 44.5 ID. Main Drive is 60 HP, 460 volt, 1775 RPM into gear box with 155 RPM out (Mixing shaft speed is approx. 100 RPM). Equipped with (4) 10 HP, 208-230/460 volt, 3505 RPM Choppers.

Blender/ Mixer Type

PLOUGH

Size

65 CU.FT.

Manufacturer

WALTER EQUIPMENT

BM-394

used Littleford Model FKM-1200D Batch Type Plow/Plough Mixer, Serial Number: 41626-4181 , 26.1 Cubic Feet Working Capacity (43.4 Total), 316 Stainless Steel. Non-jacketed chamber 32" diameter x 99" straight side, 5" diameter shaft with 8 bolt-on "T" paddles, 2 end scrapers. Driven by a 40hp, 3/60/460 volt, 1725 rpm motor thru a Falk reducer, ratio 11.6 to 1, input/output rpm 1750/155. Openings: top 4", 6", 8", 10". 2 side access doors

Blender/ Mixer Type

PLOUGH

Size

26.1 CU.FT.

Manufacturer

LITTLEFORD

BM-292

Used Littleford Plow/Plough Mixer. Model KM-1200. KM series continuous mixer. Mixing chamber is 36" dia. x 9'8" long. Approx 1200 L (42 Cu.Ft.) total capacity. Unit has main drive and (4) Choppers. Carbon Steel. Unit believed to be a Littleford but there is no nameplate.

Blender/ Mixer Type

PLOUGH

Size

42 Cu.Ft.

Manufacturer

LITTLEFORD

BM-378

***SOLD*** used Littleford Plough/Plow Blender, Stainless Steel. Approx. 10 Cu.Ft. (300 Liter) Total Capacity. Mixing chamber is 20" dia. x 58" Lgth. Has 15 HP main Drive and (2) 5 HP Choppers. Non-Jacketed. Unit has side end discharge with slide gate.

Blender/ Mixer Type

PLOUGH

Size

10 CU.FT.

Manufacturer

LITTLEFORD